|
|
Agro Engineers. |
|
About Us
Agro Engineers is focused on manufacturing Machinery and Automobile Gears, Mechanical Engineering Power Transmission Gears like Worm Gear Boxes, Custom Gears & Gear Boxes, Gear shafts and Pinions, Racks & Pinion gears, Chain Sprockets etc. We have in house Facilities for complete manufacturing to provide reliable and efficient product and services.
We are focused to provide a complete gear service, from design engineering and product development, to complete manufacture and sales of gears, gearboxes and related power transmission mechanisms. Significant technical skill and machine capability is the heart of Agnee Transmissions India Pvt. Ltd., providing industry with a qualified and reputable source for specification, design, manufacture of a variety of individual gear items and complete gear drive assemblies. Our range of: Right Angle worm gear box Worm Shaft and Worm Wheel Custom made Spur, Helical, Double Helical and Internal Gear Shaft and Pinion Bevel Gears Rack and Pinion Helical, Bevel Helical and Planetary Gear Box.
|
| Products Profile |
Helical Gear Box |
Helical Gear Box
The Helical Gear Reducer Housing is usually made of Close Grain Cast Iron or Structural Steel. They are rugged, corrosion resistant and absorb shock and vibration.
The Reducer Gearing is Helical type made from high quality alloy steel, hobbed , gas carburized , tempered and surface finish to class 10 AGMA quality. That leads to a very good efficiency and a quiet working condition.
The shafts are from alloy steel forging or bars heat treated. Low speed shafts can be solid or hollow type. Bearings are fitted on a ground journal and are spherical roller or/ and taper roller type.
Apart from standard range, Gear Boxes are also tailor made to suit individual requirement or as per specifications provided. They are available in:
Ratio from 2:1 to 625:1 Teeth Size from 1 module
|
Worm Gear Box |
Worm Gear Box
The Worm Speed Reducers have Cast Iron Gear Case of streamlined design completely air tight, dust proof and capable of being installed in open without any cover. The Worm Shaft is made of Alloy Steel, duly hardened, tempered and ground. The Worm Wheel is made of Chill Cast Phosphorous Bronze and teeth accurately Generated on Gear Hobbing Machines. They are supported on Extra Heavy Duty Taper Roller anti friction Bearings of ample margin of safety to allow adequate journals as well as thrust loads. Lubrication is effected by splash of oil from the sump. Thus, no special care is required except for occasional oil topping to the required level. Air cooling is affected by means of standard polypropylene or metal fans. Apart from standard range, Gear Boxes are also tailor made to suit individual requirement or as per specifications provided. They are available in: Overhauling of Old Gear Boxes also undertaken, Early delivery schedules
|
Shaft Mounted Speed Reducer |
Shaft Mounted Speed Reducer
Shaft Mounted Speed Reducer is one of the most versatile drives offering the largest ratio range and capable of powers up to 280kW.
Features
Model in six sizes from B to G with nominal ratios of 5:1, 13:1 and 20:1
Extended 2 year warranty.
Mounts direct onto the driven shaft:
No alignment problems.
No shaft couplings.
Flexible motor mounted in a convenient position.
No expensive adjustable base plate is required for the motor, as V-Belt tensioning is done by the use of a
torque arm which can be simply shortened or extended to swing the SMSR about its output hub to tension the
‘V’ -Belts.
Quick and easy speed changing via belt drive.
Final output speed can be very accurately obtained by adjusting the ‘V’ -Belt’ drive ratio.
High efficiency by using helical gears
Single - 98% efficiency.
Double - 96% efficiency.
Anti-run back device can easily be fitted on site.
Most SMSR use "6000" series I. S. O. plan deep groove ball bearings, stock around the world.
Double lip type oil seals used throughout.
Shaft Mounted Speed Reducers can be mounted in any position.
Proven history of success in all industrial applications; particularly, conveyors & elevators in the construction
industry.
Long established and proven drive system.
Wide range of variation available:
Shaft mount, face mount, foot mount, motor mount, hydraulic input, screw conveyor adaptor.
Ultra compact when compared to other designs.
AGNEE offers a full comprehensive repair facility including spares availability.
|
Rack and Pinion |
Rack and Pinion Specifications of Rack and Pinion gears
1.0 Module/ 25 D.P. to 12 Module/2.1 D.P.
Face Widths up to 250 mm/9"
In Mild Steel, Alloy Steel, Hardened and Tempered Steels , Case carburised,
Case Hardened Steels, Cast Iron, or as specified
Custom made as per Specifications, Drawing or Sample
Automotive and Industrial use
Required information for quotation :
(a) Material of Construction – eg. Steel.
(b) Teeth Specifications – Module, pitch.
(c) Dimensions: Face Width, Length.
(d) Hardening and tempering required etc.
(e) Holding holes if any, Quantity, Any other requirement
|
Contact Us
Contact name: Mr. Anuj Aggarawal
Works and Registered Office
E-3, Industrial Estate,Kota- 324007, Rajasthan, INDIA
Tel. no. +91-744-2363799, Fax no. +91-744-2360835
Email- info@agroengineers.com
Website- http://www.agroengineers.com
Tags:
india
This entry was posted by aboutd - January 4, 2007 4:24 pm
You can follow any responses to this entry through the RSS 2.0 feed.
You can leave a response, or trackback from your own site.
